An OvrC alternative for integrators who aren't all-SnapAV
OvrC is a strong platform when a site is mostly SnapAV-family gear. Horotics is built for the other kind of install — mixed brands, with Crestron, Lutron or KNX in the rack — and keeps the monitoring, self-heal and data on a box on site rather than in a vendor's cloud.
Different bets, not the same product
OvrC is SnapAV's remote management platform, built around its own hub hardware and deepest with SnapAV-family devices — Araknis, WattBox and Luma. If that's what fills your racks, it's a sensible choice. Horotics is a self-hosted appliance built around AV-integrator installs regardless of brand: it discovers and watches whatever is on the network, speaks native Crestron, Lutron and KNX, and does the watching and healing locally. This page is about where that difference actually matters.
Any brand, not one family
Horotics isn't built around a single vendor's hub. It fingerprints every device on the network — any switch, AP, processor or AV endpoint — against a device library that grows daily, so a mixed-brand rack is the normal case, not the exception.
Native Crestron, Lutron & KNX
Real device-level status for the control systems OvrC doesn't natively cover. If your sites have HomeWorks QSX or Crestron processors, that's the gap this closes.
See all integrations →Data stays on site
Monitoring and self-heal run on the local box; only summary status, inventory and alerts go to the cloud portal. Client traffic, credentials and SNMP strings never leave the building.
Port-level topology map
A physical, port-by-port map built automatically from UniFi topology, SNMP/LLDP and switch forwarding tables — wired by the exact port, nothing drawn by hand. OvrC has no port-level topology view.
Self-heal without lock-in
Automatic power-cycling over UniFi PoE or any managed PDU outlet, with attempt limits and cooldowns — not tied to one brand of power device.
Remote access across the LAN
Each box provisions its own secure VPN on first boot, no port-forwarding, giving real LAN-level reach for discovery and programming — not just a tunnel to one device.
Where OvrC earns its place: deep, native control of SnapAV-family equipment and automatic reboots through WattBox for dealers whose sites are built on that ecosystem. For the full side-by-side across Horotics, Domotz, OvrC, Innomesh and Auvik, see the comparison page. Product names are trademarks of their respective owners; this isn't endorsed by them.
OvrC vs Horotics, answered
Is Horotics a replacement for OvrC?
It depends on the work. OvrC is strongest for dealers whose sites are mostly SnapAV-family gear (Araknis, WattBox, Luma). Horotics suits integrators whose sites mix brands — especially where there is Crestron, Lutron or KNX to watch — and who want the box, not the cloud, doing the monitoring and self-heal on site.
Does Horotics need its own hardware like the OvrC Hub?
There is one small self-hosted Horotics box per site, but it is not tied to a single equipment family. It discovers and monitors whatever is on the network — any brand of switch, AP, processor or AV device — rather than being built around one vendor's hub.
What can Horotics do that OvrC doesn't?
Native Crestron, Lutron and KNX monitoring, a physical port-level topology map, dependency-aware alert suppression, and keeping client data on site by default rather than in a vendor cloud.
Can it power-cycle a dead device like OvrC does with WattBox?
Yes. Horotics self-heals by power-cycling over UniFi PoE or a managed PDU outlet, with attempt limits and cooldowns, rather than requiring a specific brand of power device.
Not sure if it fits your mix of sites?
Tell us what's in your racks and we'll tell you honestly where Horotics helps and where it doesn't.